HALF-MASK DONALD FFP2 NR D
Product code: DONALDFFP2NRD
Description
The DONALD FFP2 NR D half mask is a non-sterile single-use medical product, type II R. It complies with the requirements of EN 14683:2019 with a limited duration of use, up to a maximum of 8 hours. It has a bacterial filtration efficiency (BFE) of ≥ 98.0 %. The respirator is approved for use in medical environments where there is a risk of splashing bodily fluids..
PURPOSE:
Half mask DONALD FFP2 NR D is intended for protection in places exposed to infectious and infectious materials where there is a risk of splashing of body fluids. It is used to cover the mouth, nose and chin. . The product constitutes a barrier limiting the transmission of an infectious agent and protecting the respiratory tract. It prevents the spread of airborne microorganisms, reducing the risk of infection by medical personnel. Its use ensures sterile treatment conditions and protects the patient from viruses/bacteria e.g. during medical procedures.
Half mask DONALD FFP2 NR D is also intended for use by medical personnel and patients in the event of exposure to blood and other potentially infectious body fluids. It is also designed to protect respiratory system against solid particles aerosols, water-based aerosols (dust, smoke) and aerosols with liquid dispersed phase (mist). for which the TLV is ≤0,05 mg/m3 as long as the dispersed phase concentration does not exceed 10 x TLV. (Threshold Limit Value)
DESCRIPTION:
Half masks DONALD FFP2 NR D are in the shape of an isosceles trapezium. It consists of:
• Soft face part, flat folded made of non-woven filter fabric (meltblown) and non-woven cover fabric (Spunbond),
• head band - rubber or textile,
• nose clip (polypropylene reinforced with two steel wires), mounted inside the filter fabric,
• Nose seal (polyethylene foam) glued inside the face part at the height of the nose clip.
DESCRIPTION:
Half masks DONALD FFP2 NR D are in the shape of an isosceles trapezium. It consists of:
• Soft face part, flat folded made of non-woven filter fabric (meltblown) and non-woven cover fabric (Spunbond),
• head band - rubber or textile,
• nose clip (polypropylene reinforced with two steel wires), mounted inside the filter fabric,
• Nose seal (polyethylene foam) glued inside the face part at the height of the nose clip.
PURPOSE:
Half mask DONALD FFP2 NR D is intended for protection in places exposed to infectious and infectious materials where there is a risk of splashing of body fluids. It is used to cover the mouth, nose and chin. . The product constitutes a barrier limiting the transmission of an infectious agent and protecting the respiratory tract. It prevents the spread of airborne microorganisms, reducing the risk of infection by medical personnel. Its use ensures sterile treatment conditions and protects the patient from viruses/bacteria e.g. during medical procedures.
Half mask DONALD FFP2 NR D is also intended for use by medical personnel and patients in the event of exposure to blood and other potentially infectious body fluids. It is also designed to protect respiratory system against solid particles aerosols, water-based aerosols (dust, smoke) and aerosols with liquid dispersed phase (mist). for which the TLV is ≤0,05 mg/m3 as long as the dispersed phase concentration does not exceed 10 x TLV. (Threshold Limit Value)
DESCRIPTION:
Half masks DONALD FFP2 NR D are in the shape of an isosceles trapezium. It consists of:
• Soft face part, flat folded made of non-woven filter fabric (meltblown) and non-woven cover fabric (Spunbond),
• head band - rubber or textile,
• nose clip (polypropylene reinforced with two steel wires), mounted inside the filter fabric,
• Nose seal (polyethylene foam) glued inside the face part at the height of the nose clip.
DESCRIPTION:
Half masks DONALD FFP2 NR D are in the shape of an isosceles trapezium. It consists of:
• Soft face part, flat folded made of non-woven filter fabric (meltblown) and non-woven cover fabric (Spunbond),
• head band - rubber or textile,
• nose clip (polypropylene reinforced with two steel wires), mounted inside the filter fabric,
• Nose seal (polyethylene foam) glued inside the face part at the height of the nose clip.
