1021 A1 gas filter
Код продукта: OXY-1021-02
Description
1021 A1 gas filters, when assembled with the appropriate OXYLINE X1000 or OXYLINE X1200 two-filter half mask, protect the respiratory system against vapours and organic gases whose boiling point is higher than 65°C, if total volumetric concentration not exceeds 0.1%.
Class 1: Medium capacity, max gas concentration: 1000 ppm (0,1%)
Recommendations
1021 A1 gas filters are designed to provide against the following substances: aldehydes; alcohols; benzene; gasoline; acetic anhydride, bromides: ethyl and methyl; chlorides: allyl, butyl, ethylene, isopropyl, vinyl; chlorobenzene, chloroform, cyclohexane, cyclohexanol, cyclohexanone, cyclohexene, carbon tetrachloride, tetrachloroethane, tetrachloroethylene, dioxane diboromethane, dichlorobenzene, dichloroethane, dichloronitroethane, dichloropropane, diethyl ketone, di-propyl ketone, epichlorohydrin, esters, ethers, ethylbenzene, freon, heptane, methyl glycol, camphor, xylene, acetic acid, lysol, mercaptans, methylbutyl ketone, urea, kerosene, naphthalene, nicotine, nitrobenzene, nitroglycerin, nitropropane, nitrotoluene, amyl acetate, ethyl acetate, vinyl acetate, ozone, styrene, turpentine, tetralin, tetrahydrofuran, thiophene, mesityl oxide, toluene, trichloromethane, trichlorethylene and vapours of asphalt, tar, varnish and other fumes.
Restrictions on the use
1021 A1 gas filters must not be used if air oxygen content isbelow 17% vol. and in confined spacesof small cubature.
NOTE: Half masks and masks assembled with 1021 A1 gas filters do not protect against carbon monoxide. Do not use half masks with gas filters near fires.
System easy connection for extensive protection
It is possible to combine with each other, filters and absorbers in any sets..
Class 1: Medium capacity, max gas concentration: 1000 ppm (0,1%)
Recommendations
1021 A1 gas filters are designed to provide against the following substances: aldehydes; alcohols; benzene; gasoline; acetic anhydride, bromides: ethyl and methyl; chlorides: allyl, butyl, ethylene, isopropyl, vinyl; chlorobenzene, chloroform, cyclohexane, cyclohexanol, cyclohexanone, cyclohexene, carbon tetrachloride, tetrachloroethane, tetrachloroethylene, dioxane diboromethane, dichlorobenzene, dichloroethane, dichloronitroethane, dichloropropane, diethyl ketone, di-propyl ketone, epichlorohydrin, esters, ethers, ethylbenzene, freon, heptane, methyl glycol, camphor, xylene, acetic acid, lysol, mercaptans, methylbutyl ketone, urea, kerosene, naphthalene, nicotine, nitrobenzene, nitroglycerin, nitropropane, nitrotoluene, amyl acetate, ethyl acetate, vinyl acetate, ozone, styrene, turpentine, tetralin, tetrahydrofuran, thiophene, mesityl oxide, toluene, trichloromethane, trichlorethylene and vapours of asphalt, tar, varnish and other fumes.
Restrictions on the use
1021 A1 gas filters must not be used if air oxygen content isbelow 17% vol. and in confined spacesof small cubature.
NOTE: Half masks and masks assembled with 1021 A1 gas filters do not protect against carbon monoxide. Do not use half masks with gas filters near fires.
System easy connection for extensive protection
It is possible to combine with each other, filters and absorbers in any sets..